Ocular-IQ-Wallbox-ev-charger-car-park

Choose your electric vehicle home charger

A home charger is a fast and convenient way to charge your electric vehicle. Answer a few basic questions and we will recommend a charger that's right for you.
Help me choose

single-phase-vs-3-phase

Single phase or 3-phase power?

Unsure what phase power you have? An easy way to tell is to check your home’s switchboard or fusebox. Find the main switch and count the number of switches beneath it. If there are 3 switches, you’re running 3-phase power. 

Help me choose

 

 *These figures are indicative only and have been based on assumptions which can be found here.  
 
Single phase charger (7kw) =  7 km's of range in 10 mins x 6 (i.e. 60 mins in an hour) x 1 (single phase in a single phase charger) = ~42 kms range per hour
Single phase charger (22kw) =  7.4 km's of range in 10 mins x 6 (i.e. 60 mins in an hour) x 3 (three phases in a three phase charger) = ~133 kms range per hour
 
**Charger speeds may vary based on state and or distributor regulations

 


 

hc-banner-vector

Find a charger

We’ll help you choose a home charger that suits your needs.

Step 1 of 6 Next: Your home Next: Phase power Next: Solar power Next: EV energy plan Next: Recommendation Next: Finish! Finish!
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Your electric vehicle

Tell us a bit more about your electric car so that we can recommend the best charger for you.

Your home

To see if a home charger is right for you, we need to know a bit about where you live and where you’ll typically park your EV.

info

You’ll need to use public chargers

If off-street parking isn’t available, you’ll need to charge your EV using a public charger. There are around 2,500 public charging stations across Australia.

info

Landlord permission

You’ll need your landlord’s permission to install a home charger at your rental property. We can help you with the request.

Enter your details below and we’ll email you a letter template you can use to request permission.

You can still continue on to select your charger although we won’t be able to install it until you have this permission.

info

Public charging

If off-street parking isn’t available, you’ll need to charge your EV using a public charger. There are around 2,500 public charging stations across Australia. 

info

Body corporate permission

You’ll need your body corporate’s permission to install a home charger at your rental property. We can help you with the request.

Enter your details below and we’ll email you a letter template you can use to request permission.

You can still continue on to select your charger although we won’t be able to install it until you have this permission.

info

Body corporate and landlord permission

You’ll need your body corporate and landlord’s permission to install a home charger at your rental property. We can help you with the request.

Enter your details below and we’ll email you a letter template you can use to request permission.

You can still continue on to select your charger although we won’t be able to install it until you have this permission.

Single-phase or 3-phase power?

To pick the best charger for your EV, you need to know what phase power your home runs on. Basic chargers only require single-phase power, while faster chargers (11kW on up) require 3-phase.

An easy way to tell is to check your home’s switchboard, or fusebox. Find the main switch (also called the ‘normal supply main switch’) and count the number of switches beneath it. If there are 3 switches, you’re running 3-phase power. A single switch means you’re on single-phase.

What type of power is your home connected to?

Charging your EV with solar power

If you have rooftop solar power, you’ll be able to charge your EV with solar energy — provided you have the right charger.

Your car will receive solar energy when the panels are producing more energy than your house needs.

The amount of solar power that charges your car will depend on how much electricity your solar system generates and whether you're running other appliances at the same time. But if there isn't enough power in your solar system to charge the car, grid power will be used to make up the shortfall.

EV energy plan

EV drivers save a lot in petrol costs every year. That said, they do increase your electricity usage.

To help with the transition, AGL is offering EV drivers a charging plan that includes up to $120 in annual credits. It’s just one of the ways AGL is working to support EV ownership in Australia.

Concerned about the environment? So are we. That’s why we offer carbon-neutral energy, certified by Climate Active, to offset greenhouse emissions.

Disclaimer: Key details of the plan are contained in the Basic Plan Information Documents (for NSW, SA, Qld) and are available at agl.com.au/bpid or the Victorian Energy Fact Sheets (for Vic) which are available at agl.com.au/vefs. For clear advice on the right plan for you, contact AGL on 1300 856 233.

Recommended home charger

Based on the information you’ve provided, we recommend these home chargers for you:

Tesla Wall Connector 7kW

$795

✔ Compatible with all EVs
✔ Remote connectivity: Wifi
✔ Range per hour charged: 42 or 132 km*
✖ Solar-only charging mode
✖ Display Screen
✖ Removable cable
✖ Load Balancing

Single Phase
home-charger

Installation info

$1099

This price is for a standard single or 3-phase installation.

close

Single phase installation

  • Installation of a Tesla Gen 3 Wall Connector configured for Single or Three Phase charging. House must have 3 Phase Capability.
  • Dedicated circuit of approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Single or Three Phase Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • 4 Pole Type A RCBO 30mA
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.

Tesla Wall Connector 22kW

$795

✔ Compatible with all EVs
✔ Remote connectivity: Wifi
✔ Range per hour charged: 42 or 132 km*
✖ Solar-only charging mode
✖ Display Screen
✖ Removable cable
✖ Load Balancing

3 Phase
home-charger

Installation info

$1299

This price is for a standard single or 3-phase installation.

close

3-phase installation

  • Installation of a Tesla Gen 3 Wall Connector configured for Single or Three Phase charging. House must have 3 Phase Capability.
  • Dedicated circuit of approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Single or Three Phase Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • 4 Pole Type A RCBO 30mA
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.

Pulsar Plus 7kW - WAS $1549

$899

✔ Compatible with all EVs
✔ Remote connectivity: Wifi + Bluetooth
✔ Range per hour charged: 42 km*
✖ Solar-only charging mode
✖ Display Screen
✖ Removable cable
✖ Load Balancing

Single Phase
home-charger

Installation info

$1099

This price is for a single-phase installation.

close

Single phase installation

  • Installation of a 7KW / 32 AMP Single Phase EV Wall Charger. (Maximum Demand/Current setting to be determined on site).
  • Dedicated circuit approximately 20 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • Installation of electrical circuit protection in switchboard.
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP).

Pulsar Plus 22kW - WAS $1699

$899

✔ Compatible with all EVs
✔ Remote connectivity: Wifi + Bluetooth
✔ Range per hour charged: 132 km*
✖ Solar-only charging mode
✖ Display Screen
✖ Removable cable
✖ Load Balancing

3 Phase
home-charger

Installation info

$1299

This price is for a 3-phase installation.

close

3-phase installation

  • Installation of a 22KW / 32 AMP Three Phase EV Wall Charger. House must have 3 Phase Capability.
  • Dedicated circuit approximately 20 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Three Phase Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • Chargemate Inc 4 Pole Type A RCBO 30mA
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP)

Ocular LTE 7kW

$980

✔ Compatible with all EVs
✖ Remote connectivity: N/a
✔ Range per hour charged: 42 km*
✖ Solar-only charging mode
✔ Display Screen
✖ Removable cable
✖ Load Balancing

Single Phase
home-charger

Installation info

$1099

This price is for a single-phase installation.

close

Single phase installation

  • Installation of a 7KW / 32 AMP Single Phase EV Wall Charger. (Maximum Demand/Current setting to be determined on site).
  • Dedicated circuit approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • Installation of electrical circuit protection in switchboard.
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP).

Pulsar Plus (solar and powerboost) 7kW - WAS $1699

$1049

✔ Compatible with all EVs
✔ Remote connectivity: Wifi + Bluetooth
✔ Range per hour charged: 42 km*
✔ Solar-only charging mode
✖ Display Screen
✖ Removable cable
✔ Load Balancing

Single Phase
home-charger

Installation info

$1099

This price is for a single-phase installation.

close

Single phase installation

  • Installation of a 7KW / 32 AMP Single Phase EV Wall Charger. (Maximum Demand/Current setting to be determined on site).
  • Dedicated circuit approximately 20 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • Installation of electrical circuit protection in switchboard.
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP).

Pulsar Plus (solar and powerboost) 22kW - WAS $1849

$1149

✔ Compatible with all EVs
✔ Remote connectivity: Wifi + Bluetooth
✔ Range per hour charged: 132 km*
✔ Solar-only charging mode
✖ Display Screen
✖ Removable cable
✔ Load Balancing

3 Phase
home-charger

Installation info

$1299

This price is for a 3-phase installation.

close

3-phase installation

  • Installation of a 22KW / 32 AMP Three Phase EV Wall Charger. House must have 3 Phase Capability.
  • Dedicated circuit approximately 20 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Three Phase Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • Chargemate Inc 4 Pole Type A RCBO 30mA
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP)

Ocular LTE Plus 7kW (with bluetooth)

$1180

✔ Compatible with all EVs
✔ Remote connectivity: Bluetooth
✔ Range per hour charged: 42 km*
✖ Solar-only charging mode
✔ Display Screen
✖ Removable cable
✖ Load Balancing

Single Phase
home-charger

Installation info

$1099

This price is for a single-phase installation.

close

Single phase installation

  • Installation of a 7KW / 32 AMP Single Phase EV Wall Charger. (Maximum Demand/Current setting to be determined on site).
  • Dedicated circuit approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • Installation of electrical circuit protection in switchboard.
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP).

Ocular LTE 22kW

$1200

✔ Compatible with all EVs
✖ Remote connectivity: N/a
✔ Range per hour charged: 132 km*
✖ Solar-only charging mode
✔ Display Screen
✖ Removable cable
✖ Load Balancing

3 Phase
home-charger

Installation info

$1299

This price is for a 3-phase installation.

close

3-phase installation

  • Installation of a 22KW / 32 AMP Three Phase EV Wall Charger. House must have 3 Phase Capability.
  • Dedicated circuit approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Three Phase Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • 4 Pole Type A RCBO 30mA
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP)

Ocular LTE Plus 22kW (with bluetooth)

$1425

✔ Compatible with all EVs
✔ Remote connectivity: Bluetooth
✔ Range per hour charged: 132 km*
✖ Solar-only charging mode
✔ Display Screen
✖ Removable cable
✖ Load Balancing

3 Phase
home-charger

Installation info

$1299

This price is for a 3-phase installation.

close

3-phase installation

  • Installation of a 22KW / 32 AMP Three Phase EV Wall Charger. House must have 3 Phase Capability.
  • Dedicated circuit approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Three Phase Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • 4 Pole Type A RCBO 30mA
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP)

Ocular IQ Solar 7kW

$1749

✔ Compatible with all EVs
✔ Remote connectivity: Wifi
✔ Range per hour charged: 42 km*
✔ Solar-only charging mode
✔ Display Screen
✔ Removable cable
✔ Load Balancing

Single Phase
home-charger

Installation info

$1299

This price is for a single-phase installation.

close

Single phase installation

  • Installation of a 7KW / 32 AMP Single Phase EV Wall Charger. (Maximum Demand/Current setting to be determined on site).
  • Dedicated circuit approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • Installation of electrical circuit protection in switchboard.
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP).

Ocular IQ Solar 22kW

$1949

✔ Compatible with all EVs
✔ Remote connectivity: Wifi
✔ Range per hour charged: 132 km*
✔ Solar-only charging mode
✔ Display Screen
✔ Removable cable
✔ Load Balancing

3 Phase
home-charger

Installation info

$1499

This price is for a 3-phase installation.

close

3-phase installation

  • Installation of a 22KW / 32 AMP Three Phase EV Wall Charger. House must have 3 Phase Capability.
  • Dedicated circuit approximately 15 Meters of wall/ceiling mounted cable. (Inc conduit)
  • Three Phase Isolation switch mounted readily accessible to the EV Wall Charger.
  • All associated electrical containment and hardware fixings for the installation.
  • 4 Pole Type A RCBO 30mA
  • Installation as per AS/NZS 3000:2018 Electrical Installation Wiring Rules.
  • Installation of a communications device the specifics of which will be determined on site (Preference 1: Ethernet cable, Preference 2: EoP)